VC1195N 4-Way Dispensing Valve Controller

VC1195N 4-Way Dispensing Valve Controller

The VC1195N 4-Way Dispensing Valve Controller can be used to control one or two valves simultaneously. The controller will deliver accurate and repeatable dots or beads for any application.

The VC1195N valve controller provides a continuous “valve-off” state and remains in this mode until a signal is received to switch to “valve-on” mode. This instruction can derive from a remote robotic device or by the foot switch provided. When the timer is off, the valve will remain in “valve-on” state as long as the foot switch is pressed or to allow a robot to control the operation. When the timer is selected, a momentary pulse will activate the timer to open the valve for a programmed period and then close the valve automatically.


Parts (included)

  • 560033-LF: Power cord 110V
  • 560033E-LF: Power cord 220V
  • 560033E-PLUG-LF: Power cord with plug 220V
  • 560752: Input air hose with accessories
  • 560027D: Foot pedal assembly
  • 560524: Two 6 ft. air hoses


Request a Quote


VC-1195N: 4-Way valve controller 110/220V CE


Simultaneous control of two valves
Timing interval of 0.01 - 31 seconds
Fast response internal pneumatic solenoid


Size 10.50" x 8.25" x 2.75" (26.67 x 20.95 x 6.98cm)
Dispense time 0.01 – 30 seconds
Cycle initiation Momentary or continuous
Voltage 100 - 240 VAC 50/60Hz
Internal voltage 24 vdc
Air input 70 - 100psi (4.8-6.9 bar)
Air output 1 - 100psi (0.1-6.9 bar)
Weight 4 lbs. 3 oz. (1.90 kg)