Dispensing Valves

By determining your desired fluid viscosity, fluid content, and application type, Fisnar can identify the best dispensing valve for the job. We offer spool valves for high viscosity materials, poppet valves for smaller shots sizes, diaphragm valves for volatile fluids and UV resins, pinch-tube valves for volatiles and cyanoacrylates, needle valves for dots, and auger valves are for high viscosity fluids such as solder paste applications.

 

Diaphragm Valve

Diaphragm Valves

Diaphragm valves provide precision micro-shot dispensing of liquids such as cyanoacrylates, solvents, electrolytes, alcohols, and acids. A single-part diaphragm and seal separates the wetted parts for reduced maintenance.

Learn More

Dispensing Valve Controllers

Dispensing Valve Controllers

Fisnar dispensing valves all require the aid of a valve controller. Most valves require a timed shot of compressed air that will open and close the valve, while some valves require a controller that will actuate the motor in the valve.

Learn More

Jetting Valves

Jetting Valves

Jetting valves are available in non-contact jet or high-speed contact models. By using advanced piezoelectric ceramic actuation technology, users can accurately dispense small quantities of fluid at high speeds in complex applications.

Learn More

Needle Dispensing Valves

Needle Dispensing Valves

Lightweight needle valves are designed for hand-held dispensing of micro-shots and small beads of medium viscosity materials. They are available with stainless steel wetted chambers, plastic or aluminum chambers.

Learn More

710PT-U Pinch Tube Dispensing Valve

Pinch Tube Valves

Pinch tube valves are engineered for precise control of low to medium viscosity liquids. The easy-to-use stroke control adjustment knob ensures accurate and repeatable dispense volumes. The pinch tube can open or close allowing material to flow through the valve.

Learn More

Poppet Valves

Poppet Dispensing Valves

Poppet valves are multipurpose valves used for small shots and bead dispensing of medium or high viscosity fluids. They can dispense up to 300 times per minute and have a suck-back feature to prevent post-dispense dripping.

Learn More

Positive Displacement Valves

Positive Displacement Dispensing Valves

Positive displacement valves are available as either servo-driven auger valves or peristaltic dispensing pumps. Auger valves are suitable for dispensing high viscosity pastes, while peristaltic dispensing pumps use a volumetric valve.

Learn More

Progressive Cavity Valves

Progressive Cavity Valves

The PosiPump™ Progressive Cavity Valves offer true volumetric dispensing of one or two component materials to achieve exceptional levels of repeatability. The endless piston design and bi-rotational control ensures a drip free dispense cycle thanks to an infinitely adjustable suckback.

Learn More

Spool Valve

Spool Dispensing Valves

Fisnar’s spool action valves are a balanced type “on/off” segmented valve. Applying pressure to the air inlet forces the spool forward, dispensing the material. Releasing the air pressure results in the internal spring snapping back into position and closing the valve.

Learn More

Spray Valves

Spray Dispensing Valves

Spray valves are designed for dispensing urethane, paint, flux, and lubricants for conformal coating applications. All spray valves are made of stainless steel and provide close tolerance spray dispensing and are engineered to prevent material clogging.

Learn More

 

Explore product catalogs and manuals, featured videos, and expert services to learn more about Fisnar fluid dispensing products. Contact us to discuss your specific application.

 

Dispensing Valve Selection Chart

Not sure which valve is right for your application? Check out our Dispensing Valve Selection Chart that compares materials and application method to find the right product for your dispensing needs. For more information, get in touch with a Fisnar representative.