Dispensing Valves


4-way Valve Controller

The VC1195N is a 4-way valve controller that can be used to control one or two valves simultaneously. The controller is suitable for all valves in the brochure identified as requiring or optionally accepting a 4-way controller.

The VC1195N valve controller provides a continuous “valve-off” state and remains in this mode until a signal is received to switch to “valve-on” mode. This instruction can derive from a remote robotic device or by the foot switch provided.  When the timer is off, the valve will remain in “valve-on” state as long as the foot switch is pressed or to allow a robot to control the operation. When the timer is selected, a momentary pulse will activate the timer to open the valve for a programmed period and then close the valve automatically.

The VC1195N will deliver accurate and repeatable dots or beads for any application.

Parts (included)
560033-LF: Power cord 110V
560033E-LF: Power cord 220V
560033E-PLUG-LF: Power cord with plug 220V
560752: Input air hose with accessories
560027D: Foot pedal and cord
560524: 6 ft. air hoses x2


  • Simultaneous control of two valves
  • Timing interval of 0.01 - 31 seconds
  • Fast response internal pneumatic solenoid


VC-1195N: 4-Way valve controller 110/220V CE
VC1195N 4-way Valve Controller
Related Products
Size 10.50" x 8.25" x 2.75" (26.67 x 20.95 x 6.98cm)
Dispense time 0.01 – 30 seconds
Cycle initiation Momentary or continuous
Voltage 100 - 240 VAC 50/60Hz
Internal voltage 24 vdc
Air input 70 - 100psi (4.8-6.9 bar)
Air output 1 - 100psi (0.1-6.9 bar)
Weight 4lbs. 3oz. (1.90kg)

Going from Fisnar.com to Ellsworth.com

If you wish to continue to purchase from Fisnar -simply click on CLOSE THIS WINDOW below.

Fisnar’s e-commerce partner in the United States is Ellsworth Adhesives.

Click the link below to leave the Fisnar site and go to the Ellsworth Adhesives site. For credit card orders only.

Thank you for your interest in Fisnar!

× CLOSE THIS WINDOW   or click the link above.