Dispensing Valves


High Volume Valve

The 790HP-LF series high-pressure dispense valve is an economic solution when dispensing high viscosity materials such as silicones, RTV, sealant and grease. The 790HP-LF provides a snap-release shut off after dispensing, resulting in a suck-back at the fluid outlet, preventing any drip or post extrusion. 

3-Way & 4-Way Valve Operation

The 790HP-LF is a balanced type "on/off" segmented high-pressure spool valve. Applying a minimum of 50 psi to the air inlet will force the spool forward, under tension from an internal return spring, dispensing the material. 

Releasing the air pressure results in the internal spring snapping back into position and closing the valve.

790HP-LF valves can be used with a 3-way air valve controller DSP501N. Should the operation require automation, a faster closing action can be achieved using the 4-way valve controller VC1195N.


  • High-pressure fluid input up to 2500 psi
  • Suitable for very high viscosity fluids
  • Replaceable seals


790HP-LF: High-pressure valve aluminum
790HPSS-LF: High-pressure valve stainless steel
790HP-LF High Pressure Spool Valve
Related Products
Material input pressure Max. 2500psi (172.4 bar)
Air pressure required Min. 60psi (4.1 bar)
Valve Body
790HP-LF Aluminum
790HPSS-LF Stainless Steel
Connecting Ports
Operating air input 1/4" NPT
Material inlet 1/4" NPT
Material outlet 1/4" NPT
Seals O-ring - viton, seats are glass filled Teflon

Going from Fisnar.com to Ellsworth.com

If you wish to continue to purchase from Fisnar -simply click on CLOSE THIS WINDOW below.

Fisnar’s e-commerce partner in the United States is Ellsworth Adhesives.

Click the link below to leave the Fisnar site and go to the Ellsworth Adhesives site. For credit card orders only.

Thank you for your interest in Fisnar!

× CLOSE THIS WINDOW   or click the link above.