The VD510 is a diaphragm valve designed for precise flow control of low to medium viscosity materials. The diaphragm separates the wetted parts from the moving parts and, therefore, the valve is ideal for dispensing cyanoacrylates, reagents, electrolytes, glues, solvents, paints, alcohol and other volatile substances.
3-Way Valve Operation
When air pressure is applied to the VD510 valve, the valve will open and the material will be dispensed. At the end of the dispense cycle a spring assists the diaphragm to return quickly to its closed state for immediate shut-off. Shot sizes may be fine tuned by turning the stroke adjustment at the top of the valve.
- Stroke adjustment to fine tune shot size
- Separated wetted parts
- Suitable for robot integration
- Suitable for anaerobic fluids
|Operating Air Pressure||60-85 psi|
|Material Delivery Pressure||71 psi|
|Flow Rate (maximum)||0.3 l/min|
|Minimum Shot Size||0.001cc (material dependant)|
|Driving Part Materials|
|Body||AL (hard coated, black)|
|Wetted Part Materials||UHMW-PE|
|Operating Air Input||M5 x P0.8|
|Material Inlet||1/8" NPT|
|Material Outlet||Luer Lock|
Going from Fisnar.com to Ellsworth.com
If you wish to continue to purchase from Fisnar -simply click on CLOSE THIS WINDOW below.
Fisnar’s e-commerce partner in the United States is Ellsworth Adhesives.
Click the link below to leave the Fisnar site and go to the Ellsworth Adhesives site. For credit card orders only.
Thank you for your interest in Fisnar!× CLOSE THIS WINDOW or click the link above.