VMP30H dispensing on a PCB
Operating Diagram of the VMP30H Mini Poppet Valve |
The VMP30H is a multipurpose dispensing valve is designed for smaller bead and shot sizes than the VP300 dispensing valve, although the cycle rate is the same at 300 cycles a minute. Suitable for mid-high viscosity liquids such as silicone, RTV, epoxy, adhesives, grease, and fluids containing fillers.
The VMP30H can be used with the DSP501N Controller. For faster activation of the valve, the VC-1195A Valve Controller is recommended.
Features
- Suitable for dispensing adhesives, lubricants, RTV, silicone, and sealants
- Engineered for bead laying and filled material applications
- Stroke adjustment feature provides precise shot size control
- Suck-Back feature eliminates post-dispense "dripping"
Models and Accessories
Specifications
| Operating Air Pressure: |
50-90 PSI |
| Material Delivery pressure: |
Max 6.0kgf/cm2 |
| Cycle Rate: |
300cycles/min (full stroke) |
| Maximum Flow Rate: |
1.2 Liters/min |
| Minimum Shot Size: |
0.01cc (material dependant) |
| Valve Weight: |
162g |
| Driving part materials: |
Body: AL Hard Anodizing (Black)
Piston: SUS303
Piston Seal: NBR |
| Wetted part materials: |
Chamber: SUS303
CAP: SUS303
Diaphragm: UHMW-PE
Valve Seat: UHMW-PE
O-Ring (CAP): Viton |
| Connecting Ports: |
Operating Air Inlet: M5xP0.8
Material inlet: BSPT1/8"
Material outlet: Luer Lock type |
|
