VDP150 Positive Displacement Valve

VDP150 attached to the VC-1195A Valve Controller

The VDP150 positive displacement valve was developed for dispensing small shots of low and medium viscosity materials. The double-acting metering system provides accurate shot sizes of 0.005cc to 0.15cc.

The VDP150 is designed for use with the VC-1195A Valve Controller.

Features

Designed for low to medium viscosity materials
Dispenses accurate micro-shots of 0.005 to 0.015cc
Stroke adjustment feature provides accurate shot size control
Suck-Back feature eliminates post-dispense "dripping"

Models

VDP150	Positive Displacement Valve
VC-1195A	Valve Controller 110V
VCE-1195A	Valve Controller 220V CE

Operating Diagram of the VDP150

Specifications

Operating Air Pressure:	60-90 PSI
Material delivery pressure:	Spring wire diameter : ø0.3mm - Max 0.3kgf/cm2 Spring wire diameter : ø0.5mm - Max 1.2kgf/cm2
Cycle Rate:	120cycles/min (full stroke)
Minimum Shot Size:	0.005cc
Maximum Shot Size:	0.15cc/cycle
Measuring Type:	Plunger
Weight:	320g
Driving part materials:	Cylinder Body, CAP : AL Hard Anodizing (BLACK) Piston: SUS303 Check Body: SUS303, RULON
Wetted part materials:	Chamber: SUS303 Plunger: SUS420(Tin Coating) CAP, CV Body: SUS303 Check Valve: PEEK O-Ring: Perfluore
Connecting Ports:	Operating Air Input: M5xP0.8 ø4 Urethane Hose Material Inlet: BSPT1/8" Material Outlet: Luer Lock (male)