|
|
SV1000SS Stainless Steel Spray Valve
|
|
SV1000SS Spray Valve mounted on a Stand
|
The SV1000SS spray valve provides close tolerance spray dispensing of fluids of up to 1000 cps. The SV1000SS is constructed of stainless steel to prevent corrosion from volatile materials. With a spray angle of 12 degrees and an operating frequency of 200 cycles/min, the SV1000SS is designed for spraying flux, urethane, paint, lubricants, and for coating and conformal coating applications.
Features
- Shot rate frequency of 200 cycles/min
- Suitable for spraying paint, flux, urethane, and lubricants
- Stainless Steel fluid body
- Stroke adjustment to fine-tune spray area
- Nozzle design prevents clogging
- Designed for materials under 1000cps
Models
| SV1000SS |
Stainless Steel Spray Valve |
| SVC100-110 |
Valve Controller 110V |
| SVC100-220 |
Valve Controller 220V |
|
|
Operating Diagram of the SV1000SS
|
Specifications
| Weight: |
10.25oz (290gm) |
| Operating air pressure: |
70 - 100 psi |
| Atomizing air pressure: |
1 - 30 psi |
| Fluid viscosity range: |
up to 1000 cps |
| Fluid pressure: |
1 - 100 psi (0.1 - 7 bar) - depends on material viscosity |
| Nozzle diameter: |
0.028 (0.71mm) |
| Flow rate: |
up to 28cc/sec |
| Operating frequency: |
over 200 cycles/min |
| Spray angle: |
12ยบ |
| Spray pattern: |
circular (conical) |
| Operating air inlet: |
10-32 thread with push-in fitting for 1/4 tube |
| Atomizing air inlet: |
10-32 thread with push-in fitting for 1/4 tube |
| Material inlet: |
1/8 NPT with compression fitting for 1/4 tube |
|
|
