The CV629 is a pneumatically operated valve designed for precision dispensing of many types of fluids, such as solvents, oils, silicones, glues, UV adhesives, inks, etc. The system can be integrated with an automatic dispensing robot or used as a bench-dispensing valve. Avoid clean-up and maintenance by simply replacing the removable cartridge.
3-Way Valve Operation
The valve is opened by air pressure and closed by a return spring when air pressure is released. Applying a minimum of 70 psi (5 bar) air pressure to the air inlet will open the valve. Fluid is supplied to the material inlet through a 1/8 BSPP port.
Shot sizes may be fine tuned by the adjustment screw at the top of the valve; hence the CV629 valve is recommended for applications where micro deposits are required. Shot size and flow rate are controlled by the tip size, fluid pressure and the duration that the valve is open.
The model DC200 is a suitable controller for the CV629 valve.
- Aligned air and material inlets for side-by-side mounting
- Stroke adjustment to fine tune shot size
- Replaceable cartridge
- Microshot deposits
|Operating air pressure||70-85psi (4.8 - 5.9 bar)|
|Fluid delivery pressure||Max. 300psi (20.7 bar)|
|Operating air input||M5 thread with push-in fitting for Ø6 O.D. tube|
|Material inlet||M5 thread with push-in fitting for Ø6 O.D. tube|
|Material outlet||luer lock|
Going from Fisnar.com to Ellsworth.com
If you wish to continue to purchase from Fisnar -simply click on CLOSE THIS WINDOW below.
Fisnar’s e-commerce partner in the United States is Ellsworth Adhesives.
Click the link below to leave the Fisnar site and go to the Ellsworth Adhesives site. For credit card orders only.
Thank you for your interest in Fisnar!× CLOSE THIS WINDOW or click the link above.