Ratio 1:1-50:1 DXE2: Shot Size up to 2 liters a minute
Gear pump systems are designed for lower viscosities and higher volumes. They are also suited for automatic assembly lines. The two components enter into precision gears that can accurately meter the flow and therefore the volume of the fluid. A mixing nozzle finally mixes the materials.
Suitable for casting either small intricate moldings using RIM technology or applying uninterrupted beads for structural bonding or gasket forming. The DXE2 provides a reliable solution to many dispensing requirements.
- Low pressure
- Volumetric dispensing up to 20,000 cps (pressure fed)
- Output up to 2 liters a minute
- Precision long life gear pumps
- Analog speed control
- Single phase
- Compact bench mounted
- Ideal for automatic assembly lines
- Disposable static-mixer dispensing
- Variable-ratio machine enables programmable ratio
|Ratio range||pre-set 1|
|Metering pumps||inverter controlled precision flow gear pumps with non return valve and overpressure switch|
|Maximum viscosity||20,000 cps - requires pressure feed|
|Metering accuracy||better than ± 1%|
|Maximum shot output||2 liters a minute at 1|
|Mixing||disposable static mixers yellow|
|Tank capacity||5 & 10 liter stainless steel tanks|
|Controls||dispense speed control via panel mounted dial|
|Services||single phase 110V & 220V, compressed air|
|Dimensions (WxDxH)||dependent on machine specifications|
|Weight||dependent on machine specifications|
Going from Fisnar.com to Ellsworth.com
If you wish to continue to purchase from Fisnar -simply click on CLOSE THIS WINDOW below.
Fisnar’s e-commerce partner in the United States is Ellsworth Adhesives.
Click the link below to leave the Fisnar site and go to the Ellsworth Adhesives site. For credit card orders only.
Thank you for your interest in Fisnar!× CLOSE THIS WINDOW or click the link above.