The PPD-130 peristaltic pump dispenser transfers low viscosity liquids by pressure displacement applied to a turning rotor against a tube carrying material. Usually these pumps are chosen because the liquids are hazardous or difficult to work with and it is advisable to limit operator contact. Another reason is that peristaltic pumps are air free.
- Air-free dispensing
- Snuff-back prevents post-dispense dripping
- Simple load mechanism also provides easy cleaning
- Manual or Timed modes
- Large digital LED display
- Clean room compatible
|Weight 6.6lbs (3kg)|
|Input Voltage||110 - 240V models 50/60 Hz|
|Dispense time||0.01 - 99.99 seconds|
|Cycle initiation||continuous & timed|
|Rotor Speed||up to 120 rpm (max.)|
|Flow speed||0.01 - 6ml/min. (Teflon tube) 0.1 - 20ml/min (Silicone tube)|
|Dispense pressure||over 1.5Kg/cm2|
|Direction of pump||both direction (Forward / Reverse)|
|Snuff-back||programmable by reverse rotation|
|Digital display||time count down|
|I/O||connection for remote operation|
Going from Fisnar.com to Ellsworth.com
If you wish to continue to purchase from Fisnar -simply click on CLOSE THIS WINDOW below.
Fisnar’s e-commerce partner in the United States is Ellsworth Adhesives.
Click the link below to leave the Fisnar site and go to the Ellsworth Adhesives site. For credit card orders only.
Thank you for your interest in Fisnar!× CLOSE THIS WINDOW or click the link above.