1/10 Gallon Single Cartridge Pump System
A powerful medium ratio system for controlled fluid transfer from 1/10 gallon (310ml) plastic cartridges. Suitable for silicone type fluids. The system integrates a low-pulse pump design that can be used with a manual hand valve or connected to an automatic production robot for controlled dispensing applications.
The EP1310C is designed to easily transfer material for controlled dispensing via a high pressure valve. The suitable viscosity range is 5,000cps - 600,000cps. Rated at 15:1 the system provides a maximum of 996 psi regulated material pressure. The cartridge is contained with a metal jacketed cylinder.
- Material delivered air-free
- Wipe-clean action
- High-pressure regulation
- Pressure piston assist
- Adjustable piston pressure
- Electrical extruder motor
- Simple load mechanism also provides easy cleaning
- Teflon wetted parts
- Avoids waste
- No need to transfer material
- Easy hook up for automatic systems
|Size base W x D x H||8.86” x 6.69” x 25.55” (225mm x 170mm x 649mm)|
|Weight||33 lbs (15kg)|
|Power input for sensing||220V 50-60Hz - 20Watts|
|Air input pressure||30 - 100 psi|
|Max. output pressure||995 psi (68.6 bar)|
|Fluid viscosity range||10,000 - 600,000 cps|
|Min. volume per stroke||0.01cc/shot|
|Air consumption||80 l/min|
|Max. operating Temp.||50°C|
|Cartridge size||1/10th gallon - 300ml - 340ml|
|Air inlet size||1/4" npt (f)|
|Fluid outlet size||1/4" npt (f)|
|Wetted parts||304 & 17-4 pH Stainless Steel, Teflon, Viton, PEEK|
|Sound pressure level, 100psi||64.12 dB (A) @ 40cpm|
|Sound power level, 100psi||70.84 dB (A) @ 40cpm|
Going from Fisnar.com to Ellsworth.com
If you wish to continue to purchase from Fisnar -simply click on CLOSE THIS WINDOW below.
Fisnar’s e-commerce partner in the United States is Ellsworth Adhesives.
Click the link below to leave the Fisnar site and go to the Ellsworth Adhesives site. For credit card orders only.
Thank you for your interest in Fisnar!× CLOSE THIS WINDOW or click the link above.