Robotic Dispensing Accessories

Sliding Bars are designed for all robot models and allow the robot to dispense from barrels, syringes, valves, or cartridges. Longer sliding bars allow the operator to mount several valves, barrels, or cartridges on a single robot.

Barrel holders are designed to mount barrels or syringes of different sizes up to a 55cc barrel. Each barrel holder comes as a complete assembly and works with all sliding bars. For barrels smaller than 30cc, bushing adapters are used to provide a precise fit.

Cartridge holders are designed to easily mount 2.5oz, 6oz, 8oz, and 12oz cartridges for higher volume dispensing applications. Each cartridge holder comes as a complete assembly and works with all sliding bars.

Valve holders are designed to mount dispensing valves in place of barrels or cartridges. The valves dispense material directly from a reservoir, which has more capacity than a syringe or cartridge. Each valve holder works with all sliding bars.

The 360-degree conversion kit is designed to provide additional flexibility when dispensing from a barrel, cartridge, or valve that is mounted on a dispensing robot. The conversion kit fits on all mounting hardware and allows the operator to dispense material onto a tray at a specific angle.

The tip locator kit is designed to ensure that the new tip is in the exact same location as the old tip. When the dispensing barrel or tip is removed and replaced, the new tip is often in a slightly different position than the old tip was.