|
|
|
|
For connection to a Hot Melt system to control dispensing events in continuous conveyor-fed processes, such as carton & box manufacture.
Event timers are available in 2-Event and 4-Event Non-Speed Compensated models with independently selectable channels. Output can be line voltage or 24VDC. Variable "stitch" mode pattern capability is selectable on either channel on the 4-Event model.
Separate high/low speed ranges to control delay and length of pattern.
Can be used with proximity sensors, foot switch or a normally open switch.
Models
| HT2E |
2-Event timer 115/220/230V |
| HT4E |
4-Event timer 115/220/230V |
Robot Controlled I/O Interface Unit
The I/O Interface units are used for controlling hot melt systems with a robot or conveyor system.
Models
| HM24110 |
Control unit 115V for robot 24V I/O |
| HM24220 |
Control unit 220V for robot 24V I/O |
| HM10044 |
Interface cable for 115/220V I/O box |
|
|
