Product Index: Hot Melt Equipment
Chat with an Online Representative

Hot Melt Thermadose Dispensing
Hot Melt Tank Controllers
Selecting a Hot Melt System
Hot Melt tank controllers are available in three sizes of tank capacity. The selection is dependent upon material usage and frequency of operation. When coupled to a range of heavy-duty heated accessories, the tank controller becomes part of a system that can be manually configured, for example, with a hand-gun or interfaced to a robot for fully automatic operation.

Each Hot Melt tank controller consists of a heated melt tank with an integral heat grid. Tanks are coated with an approved food contact material. The tank controller is completely electric and does not require compressed air. The wide mouth design of the self-sealing tank lid will accommodate a large selection of solid adhesive forms. 		A simple six step approach in selecting a complete hot melt system that help make the right decision for your application.
Heated Hot Melt Hoses, Manual Hand Guns and Vertical Electric Applicator (VEP)
System Automation - Applicator Valve Heads, Solenoids, Manifold Applicators and Flow Heads
A range of heated hoses are both electrically and mechanically attached to hot melt controllers via easy front access connector.

Ergonomic and lightweight balanced dispensing guns with an integrated hanger for suspension hook up.

Vertical electric applicator overhead dispensing units with precise one or two hand controls. No air required.
 Electric and air operated applicator valve heads designed for mounted Installations featuring a fast "snap" function solenoid valve with precise needle-and-seat action producing a clean cutoff preventing drip.

Edge dispensing manifold applicators are commonly used in corrugated or folded carton applications to dispense hot melt in either horizontal or vertical modes.
Nozzles, Swirl Nozzles, Accessories and Timers
5 Gallon Pail Hot Melt System 115V & 220V
Hot Melt dispensing nozzles for fitting to applicator valves, manifolds and flow heads. Swirl assemblies and pattern nozzles.

Event timers are available in 2-Event and 4-Event Non-Speed Compensated models with independently selectable channels.

Accessories include tank controller stands and flushing compound.
 THERMADOSE® Hot melt pail pump systems are available in 5 gallon and 55 gallon models. They are the culmination of many years of thermal engineering and practical experience resulting in a unique design that is functional and safe, providing optimum efficiency in temperature control and pulse-free pump technology.